Ethanol Industrial Grade
Ethanol is miscible with water in all proportions and is separated from water only with difficulty.
Hydrous Ethanol forms a constant-boiling mixture, or azeotrope, with water that contains 95% ethanol and 5% water and that boils at 78.15°C; since the boiling point of this binary azeotrope is below that of pure ethanol, absolute ethanol cannot be obtained by simple distillation. Through molecular sieve dehydration technology plant Ethanol is made completely free of water with melting Point −117.3°C and boils at 78.5°C.
CAS NO – 64-17-5 and UN1170
Through Innovative Technology of distillation various impurities are removed to make Pure Ethanol Fit for use in various industries/sector.
Consectetur adipiscing elit vehicula est eget felis vehicula imperdiet non lacus at quam gravida porta usce viverra consectetur turpis id lacinia dolor sit amet.
Ethanol Industrial Grade
TECHNICAL OVERVIEW
Test | Test Method | Result | Result |
---|---|---|---|
Product purity (%) | By GC IS 323:2009 | Above 99.00 % | Above 99.95% |
Specific gravity At 15.6 °C | IS 323:2009 | 0.7900-0.8000 | 0.8100-0.8200 |
Ethanol Content At 15.6 °C by ( V/V %) | IS 323:2009 | Above 99.50 % | 95-96 % |
Miscibility with water | IS 323:2009 | Miscible | Miscible |
Moisture content ( V/V %) by KF | IS 323:2009 | Less than 0.5% | 4-5 % |
Alkalinity | IS 323:2009 | Nil | Nil |
Acidity as acetic acid | IS 323:2009 | Less than 50 PPM | Less than 30 PPM |
Easter Content as Ethyl acetate | By GC IS 323:2009 | Less than 100 PPM | NOT DETECTED |
Methanol Content | By GC IS 323:2009 | Less than 500 PPM | Less than 10 PPM |
Aldehyde content As Acetaldehyde | By GC IS 323:2009 | Less than 100 PPM | NOT DETECTED |
Lower alcohol Content | By GC IS 323:2009 | Less than 500 PPM | Less than 10 PPM |
Higher Alcohol Content | By GC IS 323:2009 | Less than 500 PPM | NOT DETECTED |
Residue on evaporation (%) | IS 323:2009 | 0.005 | 0.005 |
Denaturent | By Norms of E&p Department | As per Requirement | As per Requirement |